Система FreeBSD 5.4
Что-то sed глючит, обновил все порты ports-all, и теперь не могу скомпилить не один пакет! До этого работало, но через раз, вот что выдает:
configure: creating ./config.status
config.status: creating glib-2.0.pc
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating glib-2.0-uninstalled.pc
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating gmodule-2.0.pc
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating gmodule-export-2.0.pc
sed: sed: 3: ./confstatYEIglV/subs-3.sed: invalid command code -50: ./confstatYEIglV/s
ubs-2.sed: unescaped newline inside substitute pattern
config.status: creating gmodule-no-export-2.0.pc
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating gmodule-2.0-uninstalled.pc
sed: sed: 3: ./confstatYEIglV/subs-3.sed: invalid command code -50: ./confstatYEIglV/s
ubs-2.sed: unescaped newline inside substitute pattern
config.status: creating gmodule-no-export-2.0-uninstalled.pc
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating gthread-2.0.pc
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating gthread-2.0-uninstalled.pc
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating gobject-2.0.pc
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating gobject-2.0-uninstalled.pc
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating glib-zip
sed: sed: 3: ./confstatYEIglV/subs-3.sed: invalid command code -50: ./confstatYEIglV/s
ubs-2.sed: unescaped newline inside substitute pattern
config.status: creating Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating build/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating build/win32/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating build/win32/dirent/Makefile
sed: sed: 3: ./confstatYEIglV/subs-3.sed: invalid command code -50: ./confstatYEIglV/s
ubs-2.sed: unescaped newline inside substitute pattern
config.status: creating glib/Makefile
sed: sed: 3: ./confstatYEIglV/subs-3.sed: invalid command code -50: ./confstatYEIglV/s
ubs-2.sed: unescaped newline inside substitute pattern
config.status: creating glib/libcharset/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating glib/gnulib/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating gmodule/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating gmodule/gmoduleconf.h
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating gobject/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating gobject/glib-mkenums
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating gthread/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating po/Makefile.in
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating docs/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating docs/reference/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating docs/reference/glib/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating docs/reference/glib/version.xml
sed: sed: 3: ./confstatYEIglV/subs-3.sed: invalid command code -50: ./confstatYEIglV/s
ubs-2.sed: unescaped newline inside substitute pattern
config.status: creating docs/reference/gobject/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating docs/reference/gobject/version.xml
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating tests/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating tests/gobject/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating tests/refcount/Makefile
sed: sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute pattern
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating m4macros/Makefile
sed: 50: ./confstatYEIglV/subs-2.sed: unescaped newline inside substitute patternsed:
3: ./confstatYEIglV/subs-3.sed: invalid command code -
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: executing glibconfig.h commands
config.status: executing chmod-scripts commands
===> Building for glib-2.8.4
gmake: * Нет правила для сборки цели `all’. Останов.
* Error code 2
Stop in /usr/ports/devel/glib20.
* Error code 1
Stop in /usr/ports/accessibility/atk.
* Error code 1
Stop in /usr/ports/ftp/gftp.
Помогите плиз!
Последние комментарии
-
OlegL, 17 декабря в 15:00 → Перекличка 21
-
REDkiy, 8 июня 2023 года в 9:09 → Как «замокать» файл для юниттеста в Python? 2
-
fhunter, 29 ноября 2022 года в 2:09 → Проблема с NO_PUBKEY: как получить GPG-ключ и добавить его в базу apt? 6
-
Иванн, 9 апреля 2022 года в 8:31 → Ассоциация РАСПО провела первое учредительное собрание 1
-
Kiri11.ADV1, 7 марта 2021 года в 12:01 → Логи catalina.out в TomCat 9 в формате JSON 1
![ecobeing ecobeing](/uploads/ad/image/d543f002e66d5f1767eb81016544b976336e76e5.png)